Product Description
Kawasaki KX125 F1 1988-91 model steel KIPS valves and idler gear with ally bushes
Stronger steel replacements
THESE ARE NOT THE SAME AS KDX200 VALVES
But they are very similar. In fact they cost a little more because we machine the KMX valves to make them fit the KX125 1988 F1 model. I am sorry for this extra cost but the KX125 had different valves pretty much every single model year so it's just not worth making a production run of these valves. The shop stock qty may not reflect reality as we tend to make them up as needed so please allow a few days of grace for us to machine a set up for you.
Please make sure that the area where the valves go is cleaned thoroughly - particularly inside the locating hole in the bottom of the valve cavity. It is dirt building up in this hole and around the perimeter of the valve which leads to failure. Whilst a steel valve is unlikely to fail it will still load the system. Regular cleaning will still be required for effective operation.
For clarity included in this kit are the left and right valves and the idler gear in steel and the aluminium top bushes for these valves and gear.
Replacements for the following part numbers:
12005-1196, 12005-1097, 59051-1190, (3x) 92143-1147
