Product Description
Kawasaki KDX200 E model steel KIPS valves and idler gear with alloy bushes.(E1- E6 '89-'94)
Stronger steel EN24T replacements for these discontinued items.
Superfinished to allow smooth operation and less buildup of carbon deposits.
Our latest valves have our BDK Logo engraved into them, a tooth chamfered to easily identify correct positioning and a groove at the top to identify left (without groove), and right (with groove)valves.
Following the success of our KMX200 steel KIPS valves we were contacted by a good number of KDX200 riders who were complaining of the aluminium KIPS valves damaging and sheering off teeth at an alarming rate.
If you buy the valves or gear separately then they come with a bush.
Since then Kawasaki have discontinued these items and with some riders reporting serious damage after 1500 miles to the originals pretty much all of the existing stock has disappeared.
Please make sure that the area where the valves go is cleaned thoroughly - particularly inside the locating hole in the bottom of the valve cavity. It is dirt building up in this hole and around the perimeter of the valve which leads to failure. Whilst a steel valve is unlikely to fail it will still load the system.
To avoid confusion this kit includes equivalents of:
1 x 12005-1121, 1 x 12005-1122, 1 x 59051-1206, 3 x 92143-1147
(E1- E6 '89-'94)
We are now making valves for various other models, let us know which models you are interested in.
